Fully automatic operating system for the complete assemble of fuses
1200mm * 800mm * 1940mm (L *W*H)
AC 220V, 50HZ
1. The fuse assembly machine is a fully automatic operating system for the complete mounting of fine wire fuses. Set up as an indexing table principle a rotating table with 36 receivers operates as a central tool carrier.
2. Machine can be equipped with a hopper feeder and a level (fillstand) control system. Defective tubes are sorted out by a vacuum control system. The fuse wire insertion system is controlled by a step-by-step motor. To solder the caps a hot air soldering unit (3 possible adjustments) is used, it's temperature is electronically controlled.
3. The finished parts are tested in a cap pull-off force device and in a length measuring station. The electrical testing is done in a 4-point contact station. A sorting unit sorts "good" and "no good" fuses.
4.The high-risk danger zone is covered by a safety cabin.(to do this or not is decided by buyer)
1.Main drive and fuse wire insertion with servo motors
2.Cap& tube feeding system through a bowl feeder out from bulk material
3.a precise center-mask-system for fixing the wire at the centric soldering position
4.solder station with electronic temperature control
5.various mechanical and electrical measuring stations for assuring quality while production